Skip to main content
Top
Review meshIQ Products (G2.com)

M6WMQ Linux RHEL e-fix 6.7.9.1

Subject: E-Fix 9.1 for Linux RHEL5 (x86_64)
Date: 17-Nov-2023        
File: M6WMQ_6.7_LINUX_RHEL_x86_64_EF9.1.tar.gz
Includes
  • M6WMQ_6.7_LINUX_RHEL_x86_64_EF9.1.txt   -- this readme
  • bin                           -- M6-WMQ binary files  
  • lib                           -- M6-WMQ library files
  • nsqrc.ini                     -- M6-WMQ reason codes   
  • nsqsev.ini.ito                -- M6-WMQ Log Adapter resource file
  • nsqsev.ini.tivoli             -- M6-WMQ Log Adapter resource file
                
IMPORTANT
This E-Fix MUST be applied to builds 6.6.0 of Navigator or later (6.6.x/6.7.x)
This component is compatible with workgroup servers for both version 10 and version 11.
NOTE:  Workgroup Server 6 (nsqmgr) updates are no longer supplied.
Prerequisites
Navigator 6.6.x or 6.7.x for Linux RHEL (x86_64).

Installation

  1. Stop all Nastel processes.
  2. Back up the %APWMQ_HOME% directory.
  3. Place M6WMQ_6.7_LINUX_RHEL_x86_64_EF9.1.tar.gz in the installation directory (%APWMQ_HOME%).
  4. Extract contents 'here', under %APWMQ_HOME% replacing existing content.
  5. Restart Nastel processes (nsqmgr is no longer supported).

Fixes

APWMQ

6.7.9.1
NV-10: MQ SysMetrics not showing as facts
NV-111: New messages sent with certain RFH2 fields cause message server to crash

6.7.9

0028104: [WMQ Agent] Agent/CM should report if a Nastel queue is put inhibited 
0028107: [WMQ Agent] WGS is showing negative license count when agents are running on iSeries 

6.7.8.2

0029073: [Message Server]Message Server (nsqmsg process) terminating after putting a specific message to a queue

6.7.8.1

0028009: [Command Utilities] While importing EMS brokers using nsqmigr, it does not add EMS username to the EMS broker definition. 

6.7.8

0027269: [WMQ Agent] Agent sets process permissions to 666 which affects all generated files
0027628: [Command Utilities] Update nsqmigr for new RemoteQmgr fields 

6.7.7

0021089: [Publisher] Publisher nsqpub does not retry open of DLQ after a DLQ is defined for a queue manager 
0026865: [WMQ Agent] Windows agents not starting as a service when logs folder is missing 
0026867: [WMQ Agent] Add ability to view MQ's mqs.ini file (not the qmgrs qm.ini) 

6.7.6

0026480: [Command Utilities] Add support in nsqmigr for Solace, ACE, and fix Kafka

6.7.5.3

0025944: [WMQ Agent] RDQM support for IBM MQ 9.2.2 
0026376: [Common Engine] Queues with read ahead get stuck after reading first message
0026387: [Connection Manager] CM logic for 'Alternate User Channel Connection' defaults back to queue SYSTEM.ADMIN.COMMAND.QUEUE 

6.7.5.2

0026023: [Command Utilities] nsqmqsc MQSC snapshot for z/OS qmgr gets truncated 
0026094: [WMQ Agent] Add option to enable agent trust without the need to enable user auth 

6.7.5.1

0025446: [Command Utilities] nsqmqsc import of ALTER QMGR MQSC command into z/OS qmgr gets error "SSLCRYP is invalid" 
0025878: [Command Utilities] nsqmqsc dump of z/OS qmgr with MQSC command lines greater than 72 chars cause failure during Apply Script 
0025947: [Command Utilities] nsqmqsc sometimes missing commands for some channels 
0026031: [Common Engine] nsqmqsc does not display z/OS response when cmd DIR is executed interactively